Tips for Choosing the Correct Decking

Originally, Edmonton deck design was made with wood. Wood offers strength, easy installation and a great feel to bare feet. Unfortunately, it has to be cleaned every year and can rot, warp or splinter. In order to keep a wood deck looking good, homeowners have to clean and re-stain it every twenty four to thirty six months.

St. Albert deck installation can be made longer lasting by using pressure treated materials. These materials have a life span of around fifteen years, are fairly inexpensive and common in use. Be sure to wear gloves and masks when working with these materials. Scraps should not be burned in order to keep from releasing chemicals that can make you sick.

While tropical hardwoods make for very nice looking custom deck installation St. Albert, they are extremely difficult to work with. The woods are both beautiful and expensive. In order to drive a nail, a pilot hole must be drilled each time. The darker woods can also become hot when they are left in open spaces. These decks have a lifetime of about twenty years.

Cedar and redwood naturally resist insects and rot. When they are used for Edmonton deck installation they can last up to twenty years but they are soft and easily damaged. They do not stand up well under constant snow pack with thawing and refreezing. The woods are light weight and easy to work with. When weathered they will turn a light gray. If this change in color is not wanted, you will need to treat the wood on a regular basis.

Wood fibers and plastic are combined to make composite custom deck installation St. Albert. This material will not splinter and never has to be stained or painted. It must; however, be scrubbed on a regular basis to prevent mildew.

Some of the composite materials for Edmonton deck installation are sold as engineered decking. It has groves cut into the underside of the boards. This makes the materials lighter in weight, but still strong. Other engineered decking has groves in the sides that allow installation with hidden fasteners.

Plastic St Albert deck installation requires very little maintenance and is splinter free. This decking is made of PVC with hollow channels that cause it to be very stiff but light in weight. There are types of this decking that can be installed without wood decking underneath and types to be installed over existing decking.

The material gives a low maintenance deck that is smooth. This material is very durable and the only maintenance is an occasional cleaning. There are some people that complain that the PVC materials do not have either the sound or feel of wood Edmonton custom deck installation.