The Tools and Steps Needed for Damaged Mobile Phone Replacement

Mobile phones come in a lot of varieties and different versions; some have kitkat while some have kernel versions. You wake up seeing your phone and probably that is the last thing you see before going to bed! Damaging mobile phones are a sign that need replacement. If you are a pro at dropping your phone and your phone has already gone through numerous repairs then it is best to get it replaced.

If you have a display problem if after frequent repairs then it is high time that you get the entire phone replaced. If you are looking for mobile phone repairs near Geelong then make sure to have some basic knowledge about the tools and steps needed for damaged mobile phone replacement. This article is to guide about such tools and steps that are crucial for phone replacement.

• TOOLS REQUIRED FOR REPLACING THE PHONE, example phone screen:

The tools that are usually used are- mini screwdrivers, plastic tweezers, plastic wedges, mini torx drivers and a guitar plectrum. These stuffs are usually present in the replacement tool kit. Additionally you must also have curved tweezers, any type of dryer be it hair dryer or a heat gun and precision knife with yourself.

These tools will come handy and are included to remove the case and unscrew any of the components that poke their nose and obstruct replaying the screen display. Any mobile phone will normally have torx screws under the battery cover that first needs to be removed before you proceed with the further steps. You need not buy all the tools as all are not necessary and you may use any other alternatives as well.

• THE BASIC STEPS OF THE SCREEN REPLACEMENT:

First you need to open the phone. For this you need to remove the rear cover, battery and then identify the torx screws. These screws may be hidden somewhere near the USB ports or under the battery. Use levers and the guitar plectrum in doing so. You may also use a flat blade for this step. Be careful while you handle the ribbon cables as they are quite delicate.

Next you need to remove the damaged screen. Here you need to use a heat gun or a hair dryer to soften the adhesive. You may start with pushing from the camera hole against the glass to begin and then slowly push the glass display away from the body. Next you will have to replace the adhesive and install the new screen. Be gentle as any kind of pressure can break even the strongest of the screen glass!

Dropping your phone accidently can lead to profound damage to the phone display and it is not advisable to use a phone with a broken screen. Customers looking for Samsung Screen Replacement from Ballarat must be sure of the credentials of such service providers. Mobile phones are quite expensive and can give you a good return if you are planning to replace any of its part or the whole phone itself.