Out of all printer errors; the Canon printer b200 error may frustrate you most because of the fact that it has no apparent reason for this error to come up.

Check this post to learn what you can do if you get the Canon error b200.

Step-1: Restart Your Printer

Restarting your printer may resolve many timely glitches. In fact, many printer errors that have no specific reasons like:

  • Canon Printer Offline
  • Canon Printer Not Responding
  • Canon printer not printing

It Can be easily fixed by restarting your printer. To restart your printer, do the following:

  • Turn off your printer (take out the power cable as well)
  • Open the front cover.
  • Delete all printing jobs in the queue.
  • Give a break of at least 10-15 minutes.
  • Let your printer cool down completely.
  • Plug-in the power cable on the power socket.
  • Turn on the printer.
  • Wait until it takes its time for the initial setup.

If it was any temporary printer settings issues, it might get resolved until now. And you the canon printer error b200 will go away.

Didn’t work for you? Move on to the next troubleshooting step.

Step-2: Check Cartridges

The problem with any cartridge may also result in b200 printer error in the canon printer.

Canon has 2 and four cartridge printer range in the market. While having any trouble with cartridges you need to check all.

  • Turn off the printer.
  • Take out the cartridges one by one.
  • Replace cartridges back in their original place.
  • Also, check and replace any damaged cartridge.
  • Before placing back, do check the ink level of the cartridges.
  • Turn on the printer.

If the canon b200 printer error no longer exists, that means cartridges were the culprit. If it is still showing, move to the next troubleshooting step.

Step-3: Smudged Printhead

Any problem with the printhead could also get you a b200 printer error. In 2 cartridge printer changing cartridge can resolve the issues. As the printhead is part of the cartridges.

In four cartridges printer, you can work individually with the printhead.

  • Check and clean the printhead.
  • Turn off the printer.
  • Open the front cover.
  • Get the printhead in the center by scrolling it gently.
  • When you are halfway done, turn on the printer.
  • Close the printer cover.

Now, wait until your printer restarts entirely and get ready for work. For any printhead or carriage problem, this trick may work.

If the Canon printer error b200 is still pasted on your screen; you better contact the Canon helpline number.

Author's Bio: 

I am Amy Smith, a hardware expert of all kind of printers at Printer Error Code. We are one of the topmost service providers of all the printers.