5 Expert-Approved Tips for a Flawless Painted Trim For Your New Home

Painting a new home can be exciting and overwhelming, provided you follow the right techniques. The best way to freshen up your interiors is by applying vibrant coats of paint, not just to the surface of your walls but also to your trims. To most homeowners, painting trim can be intimidating but proper preparation of the surface can help in getting a flawless job you hardly can expect! To make your paintwork worth grabbing attention, here are some expert-approved tips for you!

Use Lights to Identify Hidden Flaws

To ensure you get flawless paintwork, all you need is to eliminate flaws or imperfections that may lie hidden in your surface walls. The easiest way to detect flaws in the trims is to get your hands and knees close to the baseboard and place a light directly on the surface. Once you discover the flaws, use a pencil to circle the imperfections so that you can take necessary precautions in filling cracks or dents later.

Sand Rough & Uneven Edges 

The next step recommended by residential painters in Perth is to sand rough edges or other parts of the surface where you suspect the paint may not stick. Scuffs and scratches can leave the surface rough and causes new paint to peel off early than expected. Run your hand over the trim and sand out everything that you find not smooth enough. By doing this, you can make your trims ready for paint.

Fill in Dents & Dings for the Perfect Finish

Exposing your walls to light makes it easier for you to identify hidden flaws. You can easily locate the dents as you have circled them before. Now, the next step is to use wood putty to fill in the dents along with your trims. Once the filling and sanding get over, you need to dust and vacuum your trim. However, be patient while executing the step to ensure the residues are completely removed from the surface. 

Make Edges Even and Locate Primer Filled Spots

Once the wood filler gets completely dried up, you should use sandpaper or a sand block to make the filler smooth and at par with the trim. Once you are assured to make everything in line with the trim, use a primer as a touch up to the filled areas. This will ensure strong adhesion and bind paint firmly to the surface of the walls.

Dust and Vacuum Your Trims Thoroughly

Filling indents and sanding out flaws will require some time and once you complete doing that, you will need to dust and vacuum your trim. This is not something to be done in a hurry. Hire professional residential painting in Perth and make sure dust, dirt and residues are completely removed from the surface. This will help paint to adhere firmly to the walls and you can expect a smooth, even and clean surface for paint.

Bottom Line

Just like you prioritise your walls before painting, similarly, you should pay attention to your trims. However, if you are not a pro, you can seek help from professional residential painters in Perth who can execute the task with perfection and care.