5 Easy Steps to Understand Terrace Waterproofing Process

Terrace waterproofing is a very crucial part of building construction. New technologies in waterproofing have changed the construction industry over the years. A huge rise in urbanization and the need for economic and effective waterproofing solutions have replaced old conventional methods of roof waterproofing with new advanced waterproofing solutions.

Here are 5 easy steps for easy understanding of the terrace waterproofing process
• Step-1: Surface preparation

Prepare the surface by proper cleaning with wire brush and water.

• Step-2: Strengthening the surface
Repair the cracks, honeycombing, and undulations on the terrace surface.
Note: it become more important if waterproofing is done on old brick bat Coba or any other old surface.

• Step-3: Decent Sealing of drainage pipes
Areas near drainage pipes are prone to leakage. Seal it with due attention.

• Step-4: Waterproofing chemical coating application
Apply the two coats of waterproofing chemical coatings.

• Step-5: Protective layer on waterproofing coatings
If there is heavy foot movements, provide a protective layer on waterproofing coatings. Else, we can skip it.

A tricky query in building construction, principally because the surfaces are flat. This means that the water cannot run off the structure instantly and will affect slowly or pool above the surface, creating timeliness for leakage.

Terrace waterproofing solutions should resist leakage during heavy rainfall. And provide insulation against heat loss during summers/winters. Terrace Waterproofing is the Best way to Stop Water leakages and Humidity. Waterproofing is a method that prevents water from penetrating your house. Waterproofing is very important as it helps keep your house dry.

In addition, these flat surfaces require sumps or collection pits for the water to flow into before entering the vertical drainage pipes, which is another great source of leaks.

The best way to waterproof a flat terrace is to use waterproofing Coating. This thin layer of waterproof material is continuous and offers no path for water to enter the structure. The membrane is laid on top of the structural slab. On top of the membrane, a filler material is laid. The filler material is necessary to give a slope to the finish of the terrace. This slope runs towards the drainage outlets.

• Washing the Roof-terrace surface and making it dust-free.
• Filling all the visible cracks by way of specially prepared Silicone crack filler.
• Applying the First coat for Filling the invisible cracks & small holes with diluted Silicone.
• Applying Second & Third coats of Silicone-based cement waterproofing to strengthen the surface.
• Applying Final Forth Coat of Silicone-based cement waterproofing.