Tips for Hauling Heavy Equipment Securely

Heavy-duty equipment costs around a few hundred thousand dollars and sometimes even above half a million dollars. Needless to say, you want this huge investment to be safe and sound; at least you don’t want to damage them during transportation.

However, for that to happen, you need to follow proper safety transportation procedures and keep a keen eye on all the safety measures when on the road, hauling your expensive equipment.

You can hire a professional towing service having expertise in equipment hauling to do the job. However, knowing about the exact and safety measures needed in hauling can help you assess and monitor the hired towing service providers in a better way. To make you know better about the expected safety and loading actions, the article below explains top safety measures and best practices for hauling heavy equipment.

Best Practices For Hauling Heavy Equipment

Hauling equipment using various types of trailers can be challenging or a breeze if you do things properly and correctly. The correct approach towards the hauling process also impacts the cost of hauling heavy-duty equipment. Some of the best equipment hauling practices at different stages of the project include;

Before Loading

Before placing your equipment on the trailer, make sure to adjust the things needed according to the requirements.

Make sure the vehicle being used has the vehicle weight ratings in line with what you are hauling. Anything exceeding the truck’s weight limit can cause accidents.
Assess whether you will need a permit for oversized or over-width equipment.
Make sure the towing experts refer to any loading guidelines provided by the engine manufacturer, such as securing brakes, locking pins, gears, decks, wideners, and outriggers.
Figure out what is the best position to disperse the weight equally on the trailer.
Check your vehicle’s specified securements rate to ensure no damage.

During Loading

Driving your equipment on the hauling trailer is a straightforward process if you follow the following steps;

It is better to place the equipment with the body of the vehicle to avoid forward shifting unless the weight distribution doesn’t allow it.
Beware of your hydraulic brakes and cylinders when attaching the securement system to keep each part intact.
Always follow the equipment manufacturer attachment instructions.
Adhere to the manufacturer’s guidelines when attaching your heavy-duty equipment to the trailer.
Work with optimum attach points that are strong and secure enough to handle the required weight.
Being a preferred tie-down method for heavy machinery, try to use chains if possible.
Whenever possible, try to use direct tie-down methods.
To prevent your equipment as well as a trailer from rolling down, make sure to use wedges, cradles, chokes, or other tools to prevent the system from shifting.

After You Set Your Equipment

Once you have got your hauling system ready, take a final sweeping look to ensure safe, secure, and reliable transportation;

Lock the machinery to prevent any articulations, if it has moving components such as pivot or hinge
Secure other items that are not attached to the equipment to the trailer by adhering to the securement guidelines.
Make sure to lower every mobile accessory of your heavy machinery, such as hydraulic shovels, booms, crane arms, and plows.
Confirm the final height of the equipment and trailer. Make sure it is under the designated limit; otherwise, you should have a special length or width exceeding permits to avoid complex legalities and fines.
Inspect both trailer and equipment to make sure they adhere to the local towing regulations.

Tips To Help You Transfer And Secure Heavy Equipment

The top consideration when hauling heavy equipment from one place to another is to keep the load safe and equipment in place. However, still, the risks associated with the task are high and cause hundreds of road accidents and injuries every year.

You can lower the associated risk substantially by giving special attention to the following checks;

Strong tie-downs
Secure vehicle equipment
Proper heavy equipment and machine protection
Obtain the correct permits
Rely on the experienced and trained drivers.
Run the driving route in advance
Secure the load with the right tools
Understand the applicable local and federal towing requirements and regulations.
Correct cargo system and device protection
Immobilized equipment
Use ideal securing procedures from the front and rear portions of the vehicle.
Work with the proper trailer
Prepare ahead of time

Conclusion

Equipment hauling involves both security and financial risks. The level of safety, reliability, security, and efficiency involved in correctly hauling your expensive equipment from one place to another directly depends on the skill and experience level of the towing professionals you choose. Doing the proper research before hiring your hauling company can lead you to hire the best and professional towing experts in your area. Don’t consider the job done until the equipment is unloaded at the destination; continuously monitor the whole process.