To fertilize the grass properly and keep in a healthy state the grass of our patios and gardens. And by keeping healthy we mean that it has a strong dark green color and does not allow weeds to appear. Nitrogen is the most important ingredient in each lawn, and each type of lawn requires different amounts to show maximum growth and yield. The frequency with which it is fertilized not only affects the appearance of the lawn, but also the level of maintenance. For perfect maintenance you can hire a service from lawn fertilization Frisco. However, the more fertilizers, the more you will have to cut, for example. Well we leave the data and see the techniques in the rest of this article to fertilize more efficiently.

Use of a diffuser or rotary diffuser:

A rotary or diffuser works well when fertilizing larger grass areas. Before filling the hopper, make sure it is closed. It is a good idea to fill it with a tarp, so you can easily collect any spilled fertilizer. First, apply fertilizer around the perimeter of the lawn and then begin to move back and forth on the lawn following an orderly pattern. The overlay application is dyed lightly to ensure that it covers the entire lawn evenly with fertilizer.

Using a fall spreader:
Choose a drop spreader for controlled fertilizer distribution. Overlap slightly on each pass to ensure adequate coverage, and don't forget to close the hopper when it reaches the end of a pass. Usually, you will pay more for a drop spreader, but if you are tending a typical suburban-sized lawn, it is worth the investment. If you accidentally pour fertilizer on your lawn, gather as much as you can, then use a stiff broom to extend the remaining fertilizer as far as possible. Water well, and do it again a few days later to help move that nitrogen through the soil and out of the root zone of the lawn.

Use of a portable diffuser:
A portable diffusion spreader works well to fertilize small areas of grass. Walk evenly and slowly, and be sure to overlap the distribution patterns slightly with each pass. A small spreader like this also works very well when you have shaded areas on your lawn that require a different fertilization rate than sunny sections. Some fertilizers combine a herbicide with grass food. These products are sold as lawn care products with weeds and applied with a lawn spreader.

Use of a handheld spreader, recalibrated and battery powered:
Hand-held, pre-calibrated and battery-powered spreaders make the application easy for small shipyards. Simply flip a switch and start walking to fertilize your lawn. This type of hand spreader works well in small yards or areas that make it difficult to maneuver a traditional lawn spreader, as on slopes.

Fertilizer and water:
A day or two before applying the fertilizer, water your lawn completely. After the grass dries, apply fertilizer. Then water lightly again. This second irrigation is of vital importance, since it washes the fertilizer from the leaves of the grass and into the soil. You can also schedule fertilizer application between rainfalls to allow the rain to wash the fertilizer in the soil. Just be sure not to fertilize before a downpour, or you can end up with fertilizer washing, especially if your lawn is sloping. Avoid applying fertilizer during a drought when the grass has browned or dried due to lack of moisture.

Grass Recycling:
Recycling the grass means leaving the grass cut in the grass after cutting. These cuts can provide up to 25 percent of your lawn's fertilizer needs, saving you time and money. One hundred pounds of grass clippings can produce up to three to four pounds of nitrogen. On an annual basis, an average half-acre lawn in a temperate zone like Pennsylvania produces more than three tons of grass clippings, so recycling grass can play an important role in the nutrition of your lawn.

Author's Bio: 

Hasan Root, a dream lover.