Screw fasteners and fastener systems can significantly reduce the corrosion of building safety. Coating plays a crucial role in the fastener corrosion resistance, but they must be used properly to achieve the operational and quality standards. Tight control throughout the film viscosity of the coating process is critically important in order to help manufacturers achieve this goal.

Became one of the leading North American manufacturer of viscometers at Cambridge Viscosity control coating viscosity. The manufacturer uses a dip coating process to apply the same envelope, which is a dry zipper viscosityfasteners. Unfortunately, the evaporation compromise the integrity of the casing. Attached, if too much make-up liquid, solid particles of coating are stretched for international standards, but the addition of a small increase of coating material cost of any improvement in performance and actual driving fasteners, dimensional specifications. The company chose VISCOpro 1600 digital viscometer from Cambridge Viscosity, to enable them to achieve quality objectives, while reducing production costs and scrap.

If the mixture is allowed to act too thick, the product may exceed the size and cost specifications, but if it is too thin, poor surface quality results. VISCOpro 1600 to allow them to constantly monitor and adjust their coating mixture to ensure that it is the ideal specification.

Prior to the implementation of the Cambridge VISCOpro system, periodic sampling process and to adjust the viscosity of the coating by adding more ground cover materials or stock makeup Fastener Manufacturer. The company, a high viscosity coating purposes and to ensure product quality, regardless of the terms that may occur using this method. They find that real-time viscosity control can significantly reduce material and labor costs. Furthermore, it is very accurate and reliable, Cambridge viscometer was chosen because it includes the temperature-compensated viscosity, which allows mathematically adjust the viscosity readings of plant temperature changes, so the film thickness is accurately maintained.

Coating plays a crucial role in the fastener corrosion resistance, but they must be used properly to achieve the operational and quality standards. Tight control throughout the film viscosity of the coating process is critically important in order to help manufacturers achieve this goal.

"Viscosity Control System that the company is now the leading zipper allows your operator to accurately add to the reservoir and accurately identify and keep setting the process in real time," - says the Cambridge Sales Manager John Cole viscosity control is especially important for the operation of dip coating, the footage is expensive. If the mixture is allowed to act too thick, the product may exceed the size and cost specifications, but if it is too thin, poor surface quality results. VISCOpro 1600 to allow them to constantly monitor and adjust their coating mixture to ensure that it is the ideal specification. "

Cambridge Viscosity, low-viscosity model systems leader, provides automated viscometers used in coatings, chemicals, petroleum and life sciences applications worldwide to optimize product and process performance. Cambridge provides a world-wide application of technical support and services anywhere and, if necessary.

Author's Bio: 

Visit viscometer.co for all types of viscometer according to your need.