Clean Or Replace? The Commercial Grease Trap Dilemma

Oftentimes it so happens that even after installing a grease trap, we are unable to decide whether we need to clean it or do we need to replace it. To begin with, the first thing that we need to keep in mind is that if we find that there is no grease buildup in the grease trap, then it is definitely not working. And that we need to get it checked out.

However, in this article, we shall talkabout the different signs of a grease trap and how each will tell us whether we need a grease trap cleaning or a replacement for our commercial establishment. But before beginning, we would like to tell you that in either case, opting for a professional grease trap cleaning agency is strongly suggested. They have the professional workers and equipment that make the cleaning a much more efficient and quicker task.

Here are 3 points to consider followed by which solution is more favorable:

1. The Grease Trap Basics: Naturally, the accumulation of FOG (Fats, Oil and Grease) can cause high sewer damages and even health hazards. It can damage the plumbing too, repairing which can cost a lot. Perhaps a lot more than the grease trap itself. So, to get a grease trap to work properly, it is suggested to be emptied or cleaned at regular intervals by hiring a grease removal company.

Thus we can say that, besides checking it often, when you find that the grease is about a quarter of the way full, it is time to go for a grease trap cleaning. Following this point will help you bring down the damage caused by spoiled food that collects over time in your commercial grease trap.

 

2. Looking for holes: This is a very important measure to take. You should always make sure that there are no holes in your commercial grease trap which can spill the grease over and out of the trap. Holes are formed due to corrosion. Food, when it breaks down, releases hydrogen sulfur gas which with time turns into sulfuric acid. Thus food if left for too long in the grease trap can corrode it and lead to the formation of cracks and holes on its exterior. This will, in turn, disable the trap from holding all the FOG. If you find holes, then know that it is time to not clean but replace your grease trap and get a new commercial grease trap installation.

 

3. Metal Grease Traps Vs Plastic Grease Traps: The material of your commercial grease trap plays a significant role in deciding whether it needs cleaning or replacement.  Older grease traps are made of metal which is prone to corrosion faster and last up to about 5 to 7 years. If you have a metal grease trap that is more than around 5 years old, it is time for you to go for a grease trap inspection. Plastic grease traps however last much longer as they are not at all prone to corrosion or rust and are perfect for commercial purpose. This saves replacement costs and only requires grease trap cleaning services.

There are many grease trap cleaning services that provide effective restaurant grease trap cleaning, maintenance and installation services along with sustainable waste disposal. Keeping these 3 points in mind will help you decide whether to go for a cleaning or replacement of your commercial grease trap.